[:Source<Hw>]:Bb:gnss:simulation:info; [:Source<Hw>]:Bb:gnss:setting:catalog; [:Source<Hw>]:Bb:gnss:setting:store; [:Source<Hw>]:Bb:gnss:setting:load - R&S SMW-K44 User Manual

Satellite Navigation
[:SOURce<hw>]:BB:GNSS:SIMulation:INFO?
Queries information on the current enabled RF bands, signals and GNSS standards.
Return values:
<SimConfigInfo>
Example:
Usage:
[:SOURce<hw>]:BB:GNSS:SETTing:CATalog?
Queries the files with settings in the default directory. Listed are files with the file exten-
sion *.gnss.
Return values:
<FileNames>
Example:
Usage:
Manual operation:
[:SOURce<hw>]:BB:GNSS:SETTing:STORe <Filename>
Saves the current settings into the selected file; the file extension (*.gnss) is
assigned automatically.
Setting parameters:
<Filename>
Example:
Usage:
Manual operation:
[:SOURce<hw>]:BB:GNSS:SETTing:LOAD <Filename>
Loads the selected file from the default or the specified directory. Loaded are files with
extension *.gnss.
Setting parameters:
<Filename>
Example:
User Manual 1178.6379.02 ─ 01
string
See Example "Selecting a predefined test scenario"
on page 207.
Query only
<filename1>,<filename2>,...
Returns a string of filenames separated by commas.
See Example "Save/Recall files with user settings"
Query only
See "Save/Recall Scenario"
"<filename>"
Filename or complete file path
See Example "Save/Recall files with user settings"
Setting only
See "Save/Recall Scenario"
"<filename>"
Filename or complete file path; file extension can be omitted
Query the existing files with the command
BB:GNSS:SETTing:CATalog?.
See Example "Save/Recall files with user settings"
Remote-Control Commands
General Settings
on page 24
on page 24
[:SOURce<hw>]:
on page 206.
on page 206.
on page 206.
209