R&S SMW-K44 User Manual page 29

Satellite Navigation
Rx = Receiver position
If you analyze the generated GNSS signal with a GNSS receiver software, you can
notice a slight difference in the receiver position. The receiver position displayed on the
"Map View" and the position displayed on the receiver software can deviate at the
beginning of a simulation. This accuracy of the "Map View" display is progressively
increasing with the time elapsed and after the first satellite handover the deviation
completely disappears.
Receiver > Vehicle Dynamics
The "Vehicle Dynamics" displays a compass showing the geographic direction of a
moving receiver, typically an airplane. It also displays an attitude indicator showing the
orientation of this airplane relative to earth's horizon.
User Manual 1178.6379.02 ─ 01
Getting Started
Simulation Monitor
29