Fast Correction Settings - R&S SMW-K44 User Manual

Satellite Navigation
5. Select "Nav Msg Content > Config" > "Differential Corrections".
The PRN mask is a list of the SVs for which the fast and long-term correction data
apply.
Settings:
GNSS PRNs/SBAS PRNs,
GNSS PRNs/SBAS PRNs, State
To enable an SV ID/PRN: select it and select "State > On".
Up to 51 satellites can be enabled, where an enabled satellite is indicated with blue
color.
It is, however, not necessary to change the PRN mask because currently, only GPS
and SBAS satellites are monitored; EGNOS and WAAS do not change the PRN mask.
In the future, when more GNSS systems are augmented, changing the PRN mask
would be necessary to define the 51 monitored SV ID/PRNs.
Remote command:
[:SOURce<hw>]:BB:GNSS:SYSTem:SBAS:EGNOS:NMESsage:NAV:PRN<ch>:
STATe
13.4.3.4

Fast Correction Settings

Access:
1. Select "System Configuration > Systems&Signals > SBAS (e.g. EGNOS) > On".
2. Select "Satellites > SBAS > Error Correction Mode > Replay Historical Data (and
Sync Atmosphere & SV Errors)".
3. Select "SV# > SV Config > Signals Configuration".
4. Select "Nav Msg Control > Edit".
5. Select "Nav Msg Content > Config" > "Differential Corrections".
User Manual 1178.6379.02 ─ 01
State................................................................................ 152
on page 276
SBAS Corrections
SBAS Settings
152