Data Logging - R&S SMW-K44 User Manual

Satellite Navigation
[:SOURce<hw>]:BB:GNSS:ADGeneration:NAVigation:CREate <Filename>
Stores the current assistance data settings into the selected navigation file. Assistance
data settings are stored as navigation file with the specific file extensions *.rs_nav or
into RINEX files with extension .10n.
Parameters:
<Filename>
Example:
Manual operation:
[:SOURce<hw>]:BB:GNSS:ADGeneration:IONospheric:CREate <Filename>
Stores the current assistance data settings into the selected acquisition file. The file
extension (*.rs_ion) is assigned automatically.
Parameters:
<Filename>
Example:
Manual operation:

19.15 Data Logging

Example: Enabling data logging
The following is a simple example on how to use the settings.
SOURce1:BB:GNSS:TMODe NAV
SOURce1:BB:GNSS:SYSTem:GALileo:STATe 1
SOURce1:BB:GNSS:TIME:STARt:TBASis GPS
SOURce1:BB:GNSS:NAVigation:SIMulation:WNUMber?
// 1780
SOURce1:BB:GNSS:NAVigation:SIMulation:TOWeek?
// 280816
SOURce1:BB:GNSS:RECeiver:V1:POSition MOV
SOURce1:BB:GNSS:RECeiver:V1:LOCation:WAYPoints:FILE "Melbourne_Car_Motion.xtd"
SOURce1:BB:GNSS:SV:SELection:GPS:MAX 4
SOURce1:BB:GNSS:SV:SELection:GALileo:MAX 4
SOURce1:BB:GNSS:LOGGing:MODE OFFL
SOURce1:BB:GNSS:LOGGing:OFFLine:TOFFset 0
User Manual 1178.6379.02 ─ 01
string
Filename or complete file path
See Example "Generating of GPS assistance data"
on page 360.
See "Navigation" on page 185
string
Filename or complete file path
See Example "Generating of GPS assistance data"
on page 360.
See "Ionospheric" on page 186
Remote-Control Commands
Data Logging
372