[:Source<Hw>]:Bb:gnss:state; [:Source<Hw>]:Bb:gnss:scenario; [:Source<Hw>]:Bb:gnss:tmode - R&S SMW-K44 User Manual

Satellite Navigation
Example:
Usage:
Manual operation:
[:SOURce<hw>]:BB:GNSS:STATe <State>
Enables/disables the GNSS signal simulation.
Parameters:
<State>
Example:
Manual operation:
[:SOURce<hw>]:BB:GNSS:SCENario?
Queries the current scenario.
Return values:
<Scenario>
Example:
Usage:
Manual operation:
[:SOURce<hw>]:BB:GNSS:TMODe <SMode>
Sets the test mode.
Parameters:
<SMode>
Example:
Manual operation:
User Manual 1178.6379.02 ─ 01
See Example "Selecting a predefined test scenario"
on page 207.
Event
See "Set to Default" on page 24
0 | 1 | OFF | ON
*RST: 0
See Example "Selecting a predefined test scenario"
on page 207.
See "State" on page 24
string
None: indicates preset configuration and user-defined configura-
tion.
Scenario name: if predefined scenario is selected.
Filename: if saved settings configuration is loaded.
See Example "Selecting a predefined test scenario"
on page 207.
Query only
See "Scenario" on page 25
NAVigation | TRACking
*RST: STATic
See Example "Selecting a predefined test scenario"
on page 207.
See "Test Mode" on page 25
Remote-Control Commands
General Settings
208