Table of Contents
Advertisement
Satellite Navigation
[:SOURce<hw>]:BB:GNSS:TRIGger:OUTPut<ch>:PULSe:WIDTh <Width>
Sets the pulse width for 1PPS, 1PP2S and PPS10 marker mode.
Parameters:
<Width>
Example:
Manual operation:
19.19 Clock Settings
Example: Clock settings
SOURce:BB:GNSS:CLOCk:SOURce ELCL
SOURce:BB:GNSS:CLOCk:MODE SAMP
CLOCk:INPUt:FREQuency?
[:SOURce<hw>]:BB:GNSS:CLOCk:SOURce
[:SOURce<hw>]:BB:GNSS:CLOCk:MODE
[:SOURce<hw>]:BB:GNSS:CLOCk:SOURce <Source>
Selects the clock source:
●
INTernal: Internal clock reference
●
ELCLock: External local clock
●
EXTernal = ELCLock: Setting only
Provided for backward compatibility with other Rohde & Schwarz signal generators
Parameters:
<Source>
Example:
Manual operation:
[:SOURce<hw>]:BB:GNSS:CLOCk:MODE <Mode>
Sets the type of externally supplied clock.
Parameters:
<Mode>
Example:
User Manual 1178.6379.02 ─ 01
integer
Range:
1 to 10 ms
*RST:
1 us
Default unit: s
See
Chapter 19.18, "Marker
See
"Marker Mode"
on page 201
.................................................................... 388
....................................................................... 388
INTernal | ELCLock | EXTernal
*RST:
INTernal
See
Chapter 19.19, "Clock
See
"Clock Source"
on page 203
CHIP
*RST:
CHIP
See
Chapter 19.19, "Clock
Remote-Control Commands
Clock Settings
Settings",
on page 386
Settings",
on page 388.
Settings",
on page 388.
388
Advertisement
Chapters
Table of Contents
