R&S SMW-K44 User Manual page 145

Satellite Navigation
4. Select "Nav Msg Control > Edit".
5. Select "Nav Msg Content > Config" > "Orbit".
6. Open the "Clock", "Time Conversion" and "Additional Data" setting in the
same manner.
Per default, the navigation message parameters are set to values, that correspond
to the values retrieved from the constellation data source.
Settings
Orbit............................................................................................................................ 145
Clock........................................................................................................................... 146
Additional
Time
Orbit
Comprises the parameters of the EGNOS/WAAS/MSAS satellites.
Parameter
Time of Day
X
G
Y
G
Z
G
X Rate of Change
G
Y Rate of Change
G
User Manual 1178.6379.02 ─ 01
Data............................................................................................................146
Conversion......................................................................................................... 146
Remote command:
[:SOURce<hw>]:BB:GNSS:SVID<ch>:SBAS:NMESsage:NAV:
EPHemeris:TOE
[:SOURce<hw>]:BB:GNSS:SVID<ch>:SBAS:NMESsage:NAV:
EPHemeris:XN
[:SOURce<hw>]:BB:GNSS:SVID<ch>:SBAS:NMESsage:NAV:
EPHemeris:YN
[:SOURce<hw>]:BB:GNSS:SVID<ch>:SBAS:NMESsage:NAV:
EPHemeris:ZN
[:SOURce<hw>]:BB:GNSS:SVID<ch>:SBAS:NMESsage:NAV:
EPHemeris:XDN
[:SOURce<hw>]:BB:GNSS:SVID<ch>:SBAS:NMESsage:NAV:
EPHemeris:YDN
on page 315
on page 323
on page 323
on page 323
on page 323
on page 323
SBAS Corrections
SBAS Settings
145