Pseudorange Errors Settings - R&S SMW-K44 User Manual

Satellite Navigation
Parameter
a to a
i0
SF to SF
1
BeiDou > Ionosphere
Comprises the parameters of the BeiDou satellites.
Parameter
Alpha
Beta
0
QZSS > Ionosphere
Comprises the parameters of the QZSS satellites.
Parameter
Alpha
Beta
0
Show Scaled Values
Switches between scaled and unscaled values representation.
Navigation message values are recalculated automatically.
Remote command:
[:SOURce<hw>]:BB:GNSS:SSValues

12.3 Pseudorange Errors Settings

Access:
1. Select "Simulation Configuration > Satellites".
2. Select the GNSS system for that you want to configure satellites constellation, for
example GPS.
3. Select "SV# > SV Config".
4. In the "SV Configuration" dialog, select "Pseudorange Errors".
5. Select, for example, "Error Mode > Profile".
User Manual 1178.6379.02 ─ 01
Remote command:
[:SOURce<hw>]:BB:GNSS:ATMospheric:GALileo[:NMESsage:
i2
INAV]:IONospheric:AI<ch0>
[:SOURce<hw>]:BB:GNSS:ATMospheric:GALileo[:NMESsage:
5
INAV]:IONospheric:SF<ch>
Remote command:
- Alpha
[:SOURce<hw>]:BB:GNSS:ATMospheric:BEIDou[:NMESsage:
0 3
DNAV]:IONospheric:ALPHa<ch0>
- Beta
[:SOURce<hw>]:BB:GNSS:ATMospheric:BEIDou[:NMESsage:
3
DNAV]:IONospheric:BETA<ch0>
Remote command:
- Alpha
[:SOURce<hw>]:BB:GNSS:ATMospheric:QZSS[:NMESsage:NAV]:
0 3
IONospheric:ALPHa<ch0>
- Beta
[:SOURce<hw>]:BB:GNSS:ATMospheric:QZSS[:NMESsage:NAV]:
3
IONospheric:BETA<ch0>
Perturbations and Errors Simulation
Pseudorange Errors Settings
on page 349
on page 350
on page 349
on page 350
on page 349
on page 350
on page 284
114