Satellite Navigation
3. Select "IQ Stream Mapper" to observe current streams routing and redefine which
signal is output at the output connectors.
Per default, stream A and B are routed to the outputs RF A and RF B.
4. To change the signal routing, tap on one of the blue circles.
For details, see R&S SMW User Manual.
5. To boost the signal of one or more streams:
a) Select "GNSS > Simulation Configuration > Output Streams > Baseband Off-
b) Select "Power Offset".
The defined power offset is applied on the signal of all satellites that are simulated
in the particular stream.
User Manual 1178.6379.02 ─ 01
Multi-Band, Multi-Antenna and Multi-Vehicle Scenarios
sets".
Output Streams
168