R&S SMW-K44 User Manual page 41

Satellite Navigation
Settings
Receiver > Number of
Positioning.....................................................................................................................41
Positioning
Receiver > Number of Vehicles
Option: R&S SMW-K120
(Access: "GNSS > Simulation Configuration > Receiver")
In "GNSS Advanced" mode, sets the number of simulated vehicles.
Further receiver settings, like position, antennas or environment effects apply for the
vehicle indicated on the side tab.
Remote command:
[:SOURce<hw>]:BB:GNSS:VEHicle:COUNt
Positioning
Determines what kind of receiver is simulated.
"Static"
"Moving"
Remote command:
[:SOURce<hw>]:BB:GNSS:RECeiver[:V<st>]:POSition
Positioning Configuration
Accesses further configuration, depending on the selected recevier type.
See:
●
Chapter 7.2, "Static
●
Chapter 7.3, "Moving
User Manual 1178.6379.02 ─ 01
Vehicles.....................................................................................41
Configuration.............................................................................................. 41
Receiver located at one of the predefined or at a user-defined posi-
tion.
See Chapter 7.2, "Static
Receiver that is moving according to a trajectory as described in a
file.
Can be used to simulate pedestrians, cars, ships, or airplanes.
See Chapter 7.3, "Moving
Receiver",
Receiver",
Receiver Type and Position
on page 381
Receiver", on page 42.
Receiver", on page 46
on page 42
on page 46
Receiver Type
on page 227
41