Broadcasted Orbit, Clock And Time Conversion Settings - R&S SMW-K44 User Manual

Satellite Navigation
Parameter
Reference Date
Reference Time
X
G
Y
G
Z
G
X Rate of Change
G
Y Rate of Change
G
Z Rate of Change
G
X Acceleration
G
Y Acceleration
G
Z Acceleration
G
Simulated Clock
Comprises the parameters of the EGNOS, WAAS, MSAS satellites.
Parameter
Reference Date
Reference Time
a , a
Gf0
13.4.2.2

Broadcasted Orbit, Clock and Time Conversion Settings

Access:
1. Select "System Configuration > Systems&Signals > SBAS (e.g. EGNOS) > On".
2. Select "Satellites > SBAS > Error Correction Mode > Replay Historical Data (and
Sync Atmosphere & SV Errors)".
3. Select "SV# > SV Config > Signals Configuration".
User Manual 1178.6379.02 ─ 01
Remote command:
[:SOURce<hw>]:BB:GNSS:SVID<ch>:SBAS:SIMulated:ORBit:DATE
on page 286
[:SOURce<hw>]:BB:GNSS:SVID<ch>:SBAS:SIMulated:ORBit:TIME
on page 287
[:SOURce<hw>]:BB:GNSS:SVID<ch>:SBAS:SIMulated:ORBit:XN
on page 285
[:SOURce<hw>]:BB:GNSS:SVID<ch>:SBAS:SIMulated:ORBit:YN
on page 285
[:SOURce<hw>]:BB:GNSS:SVID<ch>:SBAS:SIMulated:ORBit:ZN
on page 285
[:SOURce<hw>]:BB:GNSS:SVID<ch>:SBAS:SIMulated:ORBit:XDN
on page 285
[:SOURce<hw>]:BB:GNSS:SVID<ch>:SBAS:SIMulated:ORBit:YDN
on page 285
[:SOURce<hw>]:BB:GNSS:SVID<ch>:SBAS:SIMulated:ORBit:ZDN
on page 285
[:SOURce<hw>]:BB:GNSS:SVID<ch>:SBAS:SIMulated:ORBit:XDDN
on page 285
[:SOURce<hw>]:BB:GNSS:SVID<ch>:SBAS:SIMulated:ORBit:YDDN
on page 285
[:SOURce<hw>]:BB:GNSS:SVID<ch>:SBAS:SIMulated:ORBit:ZDDN
on page 285
Remote command:
[:SOURce<hw>]:BB:GNSS:SVID<ch>:SBAS:SIMulated:CLOCk:DATE
on page 286
[:SOURce<hw>]:BB:GNSS:SVID<ch>:SBAS:SIMulated:CLOCk:TIME
on page 287
[:SOURce<hw>]:BB:GNSS:SVID<ch>:SBAS:SIMulated:CLOCk:AF<s2us0>
Gf1
on page 292
SBAS Corrections
SBAS Settings
144