Systems And Signals Settings - R&S SMW-K44 User Manual

Satellite Navigation

8.1 Systems and Signals Settings

Access:
► Select "GNSS > Simulation Configuration > Systems&Signals"
In this dialog, you select which global, regional and augmentation GNSS systems
are simulated, which signals they transmit and the frequency band they use.
Settings
Systems........................................................................................................................ 52
L1, L2............................................................................................................................ 52
Signals.......................................................................................................................... 53
Systems
Defines the navigation standards that are part of the GNSS system configuration, see
Chapter 8.2, "Satellites
The available global, regional and augmentation GNSS systems depend on the instal-
led options.
Remote command:
[:SOURce<hw>]:BB:GNSS:SYSTem:GPS[:STATe]
L1, L2
Defines the used frequency band. The satellites are modulated on the respective stan-
dard carrier frequencies, defined for the corresponding frequency band.
Table 8-1: Carrier frequencies
System
GPS
GALILEO
GLONASS
BeiDou
User Manual 1178.6379.02 ─ 01
Settings", on page 54.
RF band Carrier frequency, GHz
L1 1.57542
L2 1.2276
E1 1.57542
L1 1.602
L2 1.246
L1 1.561098
Satellite's Constellation
Systems and Signals Settings
on page 212
Required option
R&S SMW-K44
R&S SMW-K98
R&S SMW-K66
R&S SMW-K94
R&S SMW-K107
52