Test Pattern Printing - Ricoh Aficio MP C305SP Field Service Manual

5. System Maintenance
[Compression ratio of ClearLightPDF]
2024
Selects the compression ratio for clearlight PDF for the two settings that can be selected
at the operation panel.
2024-001 Compression Ratio(Normal)
2024-002 Compression Ratio(High)
[Compression ratio of ClearLightPDF JPEG2000]
2025
Selects the compression ratio for clearlight PDF for the two settings that can be selected
at the operation panel.
Compression Ratio(Normal)
2025-001
JPEG2000
2025-002 Compression Ratio(High) JPEG2000

Test Pattern Printing

Printing Test pattern: SP2-109
Some of these test patterns are used for copy image adjustments but most are used primarily for design
testing.
• Do not operate the machine until the test pattern is printed out completely. Otherwise, an SC
occurs.
1. Enter the SP mode and select SP2-109-003.
2. Enter the number for the test pattern that you want to print and press [OK].
3. When you want to select the single color of Magenta, Yellow or Cyan for printing a test pattern,
select the color with SP2-109-005 (2: Cyan, 3: Magenta, 4: Yellow).
4. When you want to change the density of printing a test pattern, select the density with
SP2-109-006 to -009 for each color.
• If you select "0" with SP2-109-006 to -009, the color to be adjusted to "0" does not come up
on a test pattern.
5. When you are prompted to confirm your selection, touch "Yes" to select the test pattern for printing.
6. Touch "Copy Window" to open the copy window, then select the settings for the test print (paper
size etc.).
598
[5 to 95 / 25 / 1 /step ]
*CTL
[5 to 95 / 20 / 1 /step ]
[5 to 95 / 25 / 1 /step ]
*CTL
[5 to 95 / 20 / 1 /step ]