Test Pattern Printing (Sp5-955-1) - Ricoh U-C1 B051 Service Manual

26 July 2002

5.1.3 TEST PATTERN PRINTING (SP5-955-1)

1. Enter the SP mode and select SP5-955-1.
2. Enter the number for the test pattern that you want to print and press !. (See
the tables below.)
3. Press Copy Window to open the copy window and then select the settings for
the test print (paper size, etc.)
4. Press Start " to start the test print.
5. Press SP Mode (highlighted) to return to the SP mode display.
No. Test Pattern
None
0
1 Vertical Line (1-dot)
2 Horizontal Line (1-dot)
3 Vertical Line (2-dot)
4 Horizontal Line (2 dot)
5 1 dot Grid Pattern0 – 1
6 1 dot pair Grid Pattern – 1
7 Alternating Dot Pattern (1 dot)
8 Alternating Dot Pattern (2 dot)
9 Full Dot Pattern
10 Black band
11 Trimming Area (1 dot)
Trimming Area (2 dot)
12
Argyle Pattern (1 dot)
13
14 Argyle Pattern (2 dot)
15 Horizontal Cross Stitch
16 Checker Flag
19 Alternating Dot Pattern (4 dot)
1 dot Horizontal Line
20
(Reverse order of LD1/2 on)
1 dot Grid Pattern
21
(Reverse order of LD1/2 on)
1 dot pair Grid Pattern
22
(Reverse order of LD1/2 on)
After finishing your tests, reset SP 5-955-1 to 0.
No. Test Pattern
1 dot Grid Pattern
23
(Reverse order of LD1/2 on)
24 3 lines Grayscale
25 Horizontal Grayscale – 1
26 Vertical Grayscale – 1
29 Horizontal Grayscale – 2
30 Vertical Grayscale – 2
31 Horizontal Grayscale (600 dpi)
32 Vertical Grayscale (600 dpi)
35 Horizontal Grayscale with White Line – 1
36 Vertical Grayscale with White Line – 1
38 Horizontal Grayscale with White Line – 2
39 Vertical Grayscale with White Line – 2
Horizontal Grayscale with White Line
40
(600 dpi)
Vertical Grayscale with White Line
41
(600 dpi)
43 Blank image
50 Vertical Cross Stitch
51 2 beam
52 Trimming Area with Crossed Lines
1 dot Grid Pattern – 2
53
1 dot pair Grid Pattern – 2
54
5-63
DUMMY