Developer And Toner Bottles - Ricoh D143 Field Service Manual

• An "Original Jam" message will appear when the protection sheet is left in the ADF.

Developer and Toner Bottles

1. Open the front door [A].
2. Remove the stopper [B] (
• This stopper locks the drum positioning plate lever.
3. Release the image transfer unit lock lever [C], and turn the drum positioning plate lever [D]
counterclockwise.
4. Open the drum positioning plate [E].
5. Remove the tape [F] from the Bk development unit.
6. Remove all tapes on the other development units (Y, M, C) in the same way as described in the
previous step.
• When you remove the tape from the development unit, hold the development unit with your
hand, and then pull the tape.
7. Close the drum positioning plate. Then lock the image transfer unit lock and turn the drum
positioning plate lever clockwise.
8. Lock the drum positioning plate lever with the stopper [B] (
9. Shake each toner bottle five or six times.
x 1).
Copier Installation
x 1).
43