Show Generic-Interface-List - Cisco XR 12000 Series Command Reference Manual

show generic-interface-list

show generic-interface-list
To display information about interface-lists, use the show generic-interface-list in EXEC mode.
show generic-interface-list [ location | name | retry | standby ]
Syntax Description
location
name
retry
standby
Command Default
None
Command Modes
EXEC
Command History
Release
Release 4.3.0
Usage Guidelines
To use this command, you must be in a user group associated with a task group that includes appropriate task
IDs. If the user group assignment is preventing you from using a command, contact your AAA administrator
for assistance.
Task ID
Task ID
l2vpn
Examples
The following example displays output for the show generic-interface-list command:
RP/0/0/CPU0:router# show generic-interface-list
Cisco IOS XR Virtual Private Network Command Reference for the Cisco XR 12000 Series Router, Release 4.3.x
84
(Optional) Displays information about interface-lists for the specified location.
(Optional) Displays information about interface-lists for the specified interface
list name.
(Optional) Displays retry-list information.
(Optional) Displays Standby node specific information.
Thu Aug 2 13:48:57.462 CDT
generic-interface-list: nsrIL (ID: 1, interfaces: 2)
Bundle-Ether2 - items pending 0, downloaded to FIB
GigabitEthernet0/0/0/1 - items pending 0, downloaded to FIB
Number of items: 400
List is downloaded to FIB
Modification
This command was introduced.
Operation
read
Virtual Private Network Commands
OL-28460-01