Returning The Instrument To Local Control; Figure 1 Remote Control - Agilent Technologies 8163A Programming Manual

Introduction to Programming
18

Returning the Instrument to Local Control

If the instrument is in remote control, a screen resembling
Figure 1 will appear. Press [Local] if you wish to return the instrument to
local control.

Figure 1 Remote Control

If your Agilent 8163A/B, 8164A/B or 8166A/B is in local lockout mode
N O T E
(refer to DISPlay:LOCKout on page 142) the Local softkey is not available.
Agilent 8163A/B, 8164A/B & 8166A/B Mainframes, Fifth Edition
GPIB Interface