Obsolete Commands; Table 12 Obsolete Commands - Agilent Technologies 8163A Programming Manual

GPIB Command Compatibility List

Table 12 Obsolete Commands

250

Obsolete Commands

Table 12 contains details of commands that have been directly replaced.
Old Command
DISPlay:STATe/?
PROGram command tree
Return Loss Module
Commands
Agilent 8163A/B, 8164A/B & 8166A/B Mainframes, Fifth Edition
New Command
DISPlay:ENABle/?
SENSe:FUNCtion command tree.
Some commands from the PROGram com-
mand tree have not been replaced.
The HP 8153A application interface on the
GPIB is not supported.
Stability/Logging and Min/Max are avail-
able via a new interface.
The commands for the return loss modules
will be completely different than those for
the HP 8153A.

Obsolete Commands

Affects
8153
8153
8153