Agilent Technologies 8163A Programming Manual page 268

Error Codes
Table 18 Overview for Supported Strings
New/Old/Standard
New
Old
New
New
New
Standard
-400 to -499 Query Errors
Standard
Standard
268
Error
Number String
-323 "Flash programming error (StatUserCalTable Empty)"
It is not possible to activate the offset (l) functionality when the offset ta-
ble is empty
"Flash programming error (StatUserCalTable Full)"
The offset (l) table is full and no more ? can be stored
"Flash programming error (StatUserCalActive)"
It is not possible to program the offset (l) table when the offset (l) feature
is activated. Deactivate first.
-330 "Self-test failed"
Description:
You have started the self test, but the module has detected an error while
executing it
-340 "Printing error (StatPrintError)"
Description:
An unspecified problem occurred while communicating with the printer.
-341
"Printing error - paper out (StatPaperOut)"
Description:
The instrument cannot print because there is no paper in the connected
printer.
-342 "Printing error - offline (StatOffline)"
Description:
The instrument cannot print because the connected printer is offline.
-350 "Queue overflow"
[A specific code entered into the queue in lieu of the code that caused the
error. This code indicates that there is no room in the queue and an error
occurred but was not recorded.]
-400 "Query error"
[This is the generic query error for devices that cannot detect more specif-
ic errors. This code indicates only that a Query Error as defined in IEEE
488.2, 11.5.1.1.7 and 6.3 has occurred.]
-410 "Query INTERRUPTED"
[Indicates that a condition causing an INTERRUPTED Query error occurred
(see IEEE 488.2, 6.3.2.3); for example, a query followed by DAB or GET be-
fore a response was completely sent.]
Agilent 8163A/B, 8164A/B & 8166A/B Mainframes, Fifth Edition
GPIB Error Strings