Agilent Technologies 8163A Programming Manual page 164

Measurement Operations & Settings
command:
syntax:
description:
parameters:
response:
example:
affects:
command:
syntax:
description:
parameters:
response:
example:
affects:
164
:CONFigure[n][:CHANnel[m]]:OFFSet:WAVelength:TABle?
:CONFigure[n]][:CHANnel[m]]:OFFSet:WAVelength:TABle?
Queries the complete the offset table.
none
SCPI binary block format format (Intel byte order); wavelength:offset pairs in ascending
order.
Each value pair is transferred as 12 bytes; 8 bytes represent the wavelength, 4 bytes rep-
resent the offset.
CONF1:OFFS:WAV:TAB?
1.55e-6 | 12 | 1.7e-6 |3.4 |.....
All attenuator modules.
:CONFigure[n][:CHANnel[m]]:OFFSet:WAVelength:TABle:SIZE?
:CONFigure[n]][:CHANnel[m]]:OFFSet:WAVelength:TABle:SIZE?<wsp>MAX | MIN
Without optional parameter, queries the size of the offset table.
MAX Queries the maximum size of the offset table.
(available flash memory
MIN Queries the minimum size of the offset table. (should
4 byte unsigned integer; offset table size.
CONF1:OFFS:WAV:TAB:SIZE?
All attenuator modules.
→
binary block interpreted as, for example:
→
1000 entries)
→
50
Agilent 8163A/B, 8164A/B & 8166A/B Mainframes, Fifth Edition
Signal Conditioning
→
0)