Agilent Technologies 8163A Programming Manual page 49

Specific Command Summary
Table 4 Specific Command Summary (continued)
Command
:WAVelength:RESPonse:SIZE?
[:SOURce[n]][:CHANnel[m]]
:MODout/?
[:SOURce[n]][:CHANnel[m]]:AM
[:INTernal]:FREQuency[l]/?
:SOURce[l]/?
:STATe[l]/?
:COHCtrl:COHLevel[l]/?
[:SOURce[n]][:CHANnel[m]]:FM
:SOURce[l]/?
:STATe[l]/?
:SBSCtrl:FREQuency[l]/?
:SBSCtrl:LEVel[l]/?
[:SOURce[n]][:CHANnel[m]:]POWer
[ LEVel][ IMMediate][
: :
[ LEVel][ IMMediate][
: :
[:LEVel]:RISetime[l]/?
:ATTenuation[l]/?
:STATe/?
:UNIT/?
:WAVelength/?
[:SOURce[n]][:CHANnel[m]:]POWer:ATTenuation[l]
:AUTO/?
:DARK/?
Agilent 8163A/B, 8164A/B & 8166A/B Mainframes, Fifth Edition
Description
Returns the no. of elements in the wavelength response table.
Returns the mode of the modulation output mode of the BNC
connector on the front panel of Agilent 81640A/80A/82A Tun-
able Laser modules.
Sets or returns the frequency of an internal signal source.
Sets or returns a source for the modulating system.
Turns Amplitude Modulation of a source on or off or queries
whether Amplitude Modulation is on or off.
Sets or returns the coherence level.
Sets or returns the type of frequency modulaion employed, spe-
cifically Simulated Brillouin Scattering (SBS) control.
Turns Frequency Modulation of a source on or off or queries
whether Frequency Modulation is on or off.
Sets or returns the frequency of SBS Control modulation.
Sets or returns the level of SBS Control modulation
(as a percentage of maximum)
AMPLitude[l]] Sets the laser output power of a source.
:
AMPLitude[l]] Returns the laser output power of a source.
: ?
Sets or returns the laser rise time of a source.
Sets or returns the attenuation level for a source.
Sets or returns the state of the source output signal.
Sets or returns the power units.
Sets or returns the wavelength source of a dual-wavelength
source.
Selects Automatic or Manual Attenuation Mode for a source or
returns the selected mode.
Enables/disables 'dark' position on a source or returns whether
'dark' position is active for a source.
Specific Commands
Page
page 84
page 121
page 115
page 116
page 117
page 118
page 118
page 119
page 120
page 120
page 124
page 125
page 126
page 122
page 127
page 127
page 128
page 123
page 123
49