Agilent Technologies 8163A Programming Manual page 69

Status Reporting – The STATus Subsystem
command:
syntax:
description:
parameters:
response:
example:
command:
syntax:
description:
parameters:
response:
example:
command:
syntax:
description:
parameters:
response:
example:
Agilent 8163A/B, 8164A/B & 8166A/B Mainframes, Fifth Edition
Type
none
exact value
extrapolate below
extrapolate above
interpolated
:STATusn:OPERation:ENABle
:STATusn:OPERation:ENABle<wsp><value>
Sets the bits in the Operation Slot Status Enable Mask (OSSEM) for slot n that enable the
contents of the Operation Slot Status Event Register (OSSER) for slot n to affect the OSESR.
Setting a bit in this register to 1 enables the corresponding bit in the OSSER for slot n to af-
fect bit n of the OSESR.
The bit value for the OSSEM as a 16-bit signed integer value (0 .. +32767)
none
stat:oper:enab 128
:STATusn:OPERation:ENABle?
:STATusn:OPERation:ENABle?
Returns the OSSEM of slot n
none
The bit value for the OSSEM as a 16-bit signed integer value (0 .. +32767)
stat:oper:enab? → +128<END>
:STATus:PRESet
:STATus:PRESet
Presets all bits in all the enable masks for both the OPERation and QUEStionable status sys-
tems to 0, that is, OSSEM, QSSEM, OSESM, and QSESM.
none
none
stat:pres
Instrument Setup and Status
Bit 5 Bit 6 Bit 7
0 0
1 0
1 1
1 0
1 1
Decimal Value
0 0
0 32
0 96
1 160
1 224
69