Agilent Technologies 8163A Programming Manual page 107

Measurement Functions – The SENSe Subsystem
command:
syntax:
description:
parameters:
N O T E
response:
examples:
affects:
dual sensors:
command:
syntax:
description:
parameters:
response:
examples:
affects:
dual sensors:
Agilent 8163A/B, 8164A/B & 8166A/B Mainframes, Fifth Edition
:SENSe[n]:[CHANnel[m]]:POWer:REFerence:STATe:RATio
:SENSe[n]:[CHANnel[m]]POWer:REFerence:STATe:RATio<wsp>
<slot number>|255|TOREF,<channel number>
Selects the reference for the module.
slot number: an integer value representing the slot number you want to reference
255 or TOREF: results are displayed relative to an absolute reference
channel number: an integer value representing the channel number you want to refer-
ence
If you want to reference another power sensor channel, use an integer value
corresponding to the slot for the first parameter and an integer value corresponding
to the channel for the second value.
If you want to use an absolute reference, use TOREF as the first parameter and any
integer value as the second parameter.
none
sens1:pow:ref:stat:rat 2,1
sens1:pow:ref:stat:rat TOREF,1
All power meters
Master and slave channels are independent.
:SENSe[n]:[CHANnel[m]]:POWer:REFerence:STATe:RATio?
:SENSe[n]:[CHANnel[m]]POWer:REFerence:STATe:RATio?
Returns the reference setting for the module.
none
results are displayed relative to an absolute reference or to the current power reading from
another channel.
→
sens1:pow:ref:stat:rat?
→
sens1:pow:ref:stat:rat?
All power meters
Master and slave channels are independent.
+255,+0<END>
+2,+1<END>
Measurement Operations & Settings
References channel 2.1
References an absolute reference
results are displayed relative
to an absolute reference
results are displayed relative
to channel 2.1
107