Specific Command Summary; Table 4 Specific Command Summary - Agilent Technologies 8163A Programming Manual

Specific Commands

Table 4 Specific Command Summary

Command
:CONFigure[n][:CHANnel[m]]:OFFSet
:WAVelength:REFerence/?
:WAVelength:STATe/?
:WAVelength:TABle?
:WAVelength:TABle:SIZE?
:WAVelength:VALue
:WAVelength:VALue:DELete
:WAVelength:VALue:DELete:ALL
:WAVelength:VALue:OFFSet?
:WAVelength:VALue:PAIR?
:WAVelength:VALue:WAVelength?
44

Specific Command Summary

The commands are ordered in a command tree. Every command belongs to
a node in this tree.
The root nodes are also called the subsystems. A subsystem contains all
commands belonging to a specific topic. In a subsystem there may be
further subnodes.
All the nodes have to be given with a command. For example in the
command
•
DISPlay
display,
•
BRIGhtness
If a command and a query are both available, the command ends
N O T E
So,
disp:brig/?
Table 4 gives an overview of the command tree. You see the nodes, the
subnodes, and the included commands.
Description
Sets or queries the slot and channel of the external reference
powermeter.
Switches or queries attenuator Offset Table on or off/?
Queries the complete offset table.
Queries the size of the offset table.
Adds a value pair (wavelength, offset) to the offset table.
Deletes an offset value pair.
Deletes all value pairs from the offset table.
Queries an offset value according to wavelength or index.
Queries an offset/wavelength value pair according to wavelength
or index.
Queries a wavelength value from its index in the offset table
disp:brig
is the subsystem containing all commands for controlling the
is the command selecting brightness.
means that
disp:brig
Agilent 8163A/B, 8164A/B & 8166A/B Mainframes, Fifth Edition
Specific Command Summary
and are both available.
disp:brig?
.
/?
Page
page 161
page 160
page 164
page 164
page 161
page 163
page 163
page 162
page 163
page 162