Agilent Technologies 8163A Programming Manual page 73

Status Reporting – The STATus Subsystem
command:
syntax:
description:
parameters:
response:
example:
command:
syntax:
description:
parameters:
response:
example:
command:
syntax:
description:
parameters:
response:
example:
Agilent 8163A/B, 8164A/B & 8166A/B Mainframes, Fifth Edition
:STATus:QUEStionable:CONDition:LEVel1?
:STATus:QUEStionable:CONDition:LEVel1?
Returns the Questionable Status Condition Summary Register for slots 15 to 17 of the
Agilent 8166A/B Lightwave Multichannel System.
none
The sum of the results for the slots (a 16-bit signed integer value, where 0 ≤ value ≤ 32767):
Bits Mnemonics
Agilent 8166A/B
15-4 Not used
3 Slot 17 Summary
2 Slot 16 Summary
1 Slot 15 Summary
0 Not used
stat:ques:cond:level1? → +0<END>
:STATus:QUEStionable:ENABle:LEVel1
:STATus:QUEStionable:ENABle:LEVel1<wsp><value>
Sets the bits in the Questionable Status Enable Summary Mask (QSESM) that enable the
contents of the QSESR for slots 15 - 17 of the Agilent 8166A/B Lightwave Measurement
System to affect the Status Byte (STB).
Setting a bit in this register to 1 enables the corresponding bit in the OSESR for slots 15 - 17
of the Agilent 8166A/B Lightwave Measurement System to affect bit 7 of the Status Byte.
The bit value for the QSESM as a 16-bit signed integer value (0 .. +32767)
The default value is 0.
none
stat:oper:enab:level1 128
:STATus:QUEStionable:ENABle:LEVel1?
:STATus:QUEStionable:ENABle:LEVel1?
Returns the QSESM for the QSESR for slots 15 - 17 of the Agilent 8166A/B Lightwave Mea-
surement System
none
The bit value for the QSESM as a 16-bit signed integer value (0 .. +32767)
stat:oper:enab:level1? → +128<END>
Decimal Value
0
8
4
2
0
Instrument Setup and Status
73