Agilent Technologies 8163A Programming Manual page 61

IEEE-Common Commands
command:
syntax:
description:
parameters:
response:
example:
command:
syntax:
description:
parameters:
response:
example:
Agilent 8163A/B, 8164A/B & 8166A/B Mainframes, Fifth Edition
*RST
*RST
The ReSeT command *RST sets the mainframe and all modules to the reset setting (stan-
dard setting) stored internally.
Pending *OPC? actions are cancelled.
The instrument is placed in the idle state awaiting a command. The *RST command clears
the error queue.
The *RST command is equivalent to the *CLS command AND the syst:preset command.
The following are not changed:
• GPIB (interface) state
• Instrument interface address
• Output queue
• Service request enable register (SRE)
• Standard Event Status Enable Mask (SESEM)
none
none
*RST
*STB?
*STB?
The STatus Byte query *STB? returns the contents of the Status Byte register.
none
The bit value for the register (a 16-bit signed integer value):
Bit Mnemonic
7 (MSB) Operation Status (OSB)
6 Not used
5 Event Status Bit (ESB)
4 Message Available (MAV)
3 Questionable Status (QSB)
2 Not used
1 Not used
0 Not used
*STB? → 128<END>
Instrument Setup and Status
Decimal Value
128
0
32
16
8
0
0
0
61