Agilent Technologies 8163A Programming Manual page 137

Signal Generation – The SOURce Subsystem
command:
syntax:
description:
N O T E
parameters:
response:
example:
affects:
command:
syntax:
description:
parameters:
response:
example:
affects:
Agilent 8163A/B, 8164A/B & 8166A/B Mainframes, Fifth Edition
[:SOURce[n]][:CHANnel[m]]:WAVelength:SWEep:CYCLes
[:SOURce[n]][:CHANnel[m]]:WAVelength:SWEep:CYCLes
<value>|MIN|MAX|DEF|0
Sets the number of cycles.
Cannot be set while a sweep is running.
The number of cycles is an integer value.
Also allowed are:
none
wav:swe:cycl 3
All tunable laser modules
[:SOURce[n]][:CHANnel[m]]:WAVelength:SWEep:CYCLes?
[:SOURce[n]][:CHANnel[m]]:WAVelength:SWEep:CYCLes?
[<wsp>MIN|MAX|DEF]
Returns the number of cycles.
none
Also allowed are:
The number of cycles as an integer value.
→
wav:swe:cycl? +3<END>
All tunable laser modules
MIN: minimum programmable value
MAX: maximum programmable value
DEF: This is not the preset (*RST) default value but is half the
sum of, the minimum programmable value and the maximum
programmable value
0: cycles continuously.
MIN: minimum programmable value
MAX: maximum programmable value
DEF: This is not the preset (*RST) default value but is half the
sum of, the minimum programmable value and the maximum
programmable value
Measurement Operations & Settings
<wsp>
137