Agilent Technologies 8163A Programming Manual page 83

Root Layer Command
command:
syntax:
description:
parameters:
response:
example:
affects:
command:
syntax:
description:
N O T E
parameters:
response:
example:
affects:
command:
syntax:
description:
response:
response
format:
example:
affects:
Agilent 8163A/B, 8164A/B & 8166A/B Mainframes, Fifth Edition
:SLOT[n]:HEAD[m]:OPTions?
:SLOT[n]:HEAD[m]:OPTions?
Returns information about an optical head's options.
none
A string.
→
slot1:head:opt? NO CONNECTOR OPTION, NO INSTRUMENT
OPTIONS<END>
Optical heads
:SLOT[n]:HEAD[m]:TST?
:SLOT[n]:HEAD[m]:TST?
Returns the latest selftest results for an optical head.
This command does not perform a selftest. Use selfTeST command, "*TST?" on
page 62, to perform a selftest.
none
Returns an error code and a short description of the error.
→
slot:head:tst? +0,"self test OK"<END>
Optical heads
:SLOT[n]:HEAD[m]:WAVelength:RESPonse?
:SLOT[n]:HEAD[m]:WAVelength:RESPonse?
Returns the wavelength response from a wavelength calibrated module in binary format.
Wavelength Response table as a binary block.
One 8 byte long wavelength calibration value pair consisting of a 4 byte long float for wave-
length and a 4 byte long float for the scalar calibration factor.
For more information on binary block formats see "Data Types" on page 26
→
slot1:head1:wav:resp?
Attenuator with power control, all powermeters, return loss modules
#536570........
Measurement Operations & Settings
83