Wiring The External Device Connection Connector Pins - Mitsubishi Electric AJ65BT-D75P2-S3 User Manual

4 INSTALLATION, WIRING AND MAINTENANCE OF THE PRODUCT

4.5.2 Wiring the external device connection connector pins

The pins for the external device connection connector are wired in the following
manner.
(1)
Disassembling the connector section
(2)
Connecting the connector and wire
(3)
Assembling the connector section
(1) Disassembling the connector section
(a) Loosen and remove screw A.
(Take care not to lose the screw and nut.)
(b) Open the connector cover from the connector side.
(c) Remove the connector and cable fixture.
Connector
section
Connector cover
..... Disassemble the connector section,
and remove the connector.
..... Solder the wire onto the connector pin.
..... Assemble the connector section.
Cable fixture
4 - 20
A
Connector
MELSEC-A