Appendix 1 Change With Upgrade - Mitsubishi Electric AJ65BT-D75P2-S3 User Manual

Hide thumbs Also See for AJ65BT-D75P2-S3:

Appendix 1 Change with Upgrade

(1) Additional function

Speed/position changeover control (ABS

*1 Software version of H or later or serial number (first five digits) of "16041" or later

(2) Change of the indicator components

The following table indicates the function added to the D75P2 per software version.

This function starts positioning under

speed control, switches speed control to

position control with external command

signal input, and then stops positioning at

the specified address.

With the addition of the above function, the following buffer memory addresses have

Setting item

Speed/position

changeover control

(ABS mode) function

*For more information on the setting details, refer to section "5.7 List of control data".

Since hardware version L or later, indicator components have been changed to LED

(What is to be displayed is not changed from the 17-segment LEDs.)

For details, refer to "13.4 LED display function".

Setting value Setting details

Appendix - 2

Software versions

: With function,

: Without function

Buffer memory addresses