List Of Control Data; System Control Data - Mitsubishi Electric AJ65BT-D75P2-S3 User Manual

5 DATA USED FOR POSITIONING CONTROL

5.7 List of control data

5.7.1 System control data

Setting item
Cd.1 Clock data setting (hour)
Cd.2 Clock data setting (minute,
second)
Cd.3 Clock data writing
Cd.4 Target axis*
* Cd.4 to Cd.8 are data used to transmit the positioning data between the OS memory and buffer memory.
(Refer to section "7.2 Data transmission process".)

The clock data (hour) from the PLC CPU is set after the D75P2 power is turned
ON.

The clock data (minute, second) from the PLC CPU is set after the D75P2 power
is turned ON.

After setting the clock data in Cd.1 and Cd.2 , when setting the data in
Md.5 and Md.6 as the D75P2 clock data, set "1".

When the setting is completed, the OS sets "0".

Set the axis targeted for reading or writing.
5 - 100
Setting details
MELSEC-A