Advertisement
4
INSTALLATION, WIRING AND MAINTENANCE OF THE PRODUCT
4.3 Connection of CC-Link dedicated cable
[1] Connection procedure
Connect the D75P2 with the master module by the "CC-Link dedicated cable". Make
connection in the following procedure.
(1)
Confirm if all phases of the externally supplied power for the system (the master
modules, peripheral devices, etc.) are switched off or not.
*If not, switch off all phases.
(2)
Connect the D75P2 and master module in accordance with the following
diagram.
4 - 12
MELSEC-A
Advertisement
Chapters
Troubleshooting
