Mitsubishi Electric AJ65BT-D75P2-S3 User Manual page 548

13 COMMON FUNCTIONS
(2) Display details
Pressing the "Mode switch" changes the "mode" of the data displayed in the LED
display area in the following order.
Module status
Axis status
OS type
OS version
I/O information n
Stepping motor mode
REMARK
The "OS type" appears in the LED display area for 1 second after the PLC power is
turned ON, then the "Module status" display appears.
...................................................................
...................................................................
......................................
......................................
SVON
Z-ON
ULMT
LLMT
V-P
DOG
............................
13 - 8
MELSEC-A
The OS type is displayed.
(17-segment LED display: S003)
The OS version is displayed.
(17-segment LED display: V***)
.......................................
The axis indicator LED corresponding
to the axis in the stepping motor mode
turns ON.
The 17-segment LED displays "STMM".
Refer to (1)
Refer to (2)
Refer to (3)