Mitsubishi Electric AJ65BT-D75P2-S3 User Manual page 39

1 PRODUCT OUTLINE
Understand the product functions and usage methods, the configuration devices
1)
and specifications required for positioning control, and design the system.
Install the D75P2 onto the DIN rail or enclosure surface, wire the D75P2 and
2) external connection devices (drive unit, etc.), and connect the D75P2 and
peripheral devices. Check that the D75P2 operates correctly. (Single module test)
Using the D75P2 software package, set the parameters, positioning data, start
3)
block data and condition data required for the positioning control to be executed.
Using the GPP function software package, create the sequence program required
for positioning operation. (When not using the AD75 software package, also create
4)
the sequence program for setting data.)
Write the parameters and positioning data, etc., created with the AD75 software
5)
package into the D75P2.
Using the GPP function software package, write the created sequence program into
6) the PLC CPU. (When not using the AD75 software package, also write in the
sequence program for setting data.)
Carry out test operation and adjustments in the test mode to check the connection
with the D75P2 and external connection device, and to confirm that the designated
7)
positioning operation is executed correctly. (Debug the set "parameters" and
"positioning data", etc.)
Carry out test operation and adjustment to confirm that the designated positioning
8) operation is executed correctly. (Debug the created sequence program. When not
using the AD75 software package, also debug the set data.
Actually operate the positioning operation. At this time, monitor the operation state
9)
as required. If an error or warning occurs, remedy.
10) Service the D75P2 as required.
11) Dispose of the D75P2.
The following work is carried out with the processes shown on the left page.
Details
1 - 13
MELSEC-A
Reference

Chapter 1

Chapter 2

Chapter 3

Chapter 8 to Chapter 13

Chapter 4

Chapter 5

Chapter 8 to Chapter 13

AD75 Software Package
Operating Manual

Chapter 6

GPP Function Software
Package Operating Manual

Chapter 7

AD75 Software Package
Operating Manual

Chapter 7

GPP Function Software
Package Operating Manual

AD75 Software Package
Operating Manual

GPP Function Software
Package Operating Manual

Chapter 5

Chapter 14

AD75 Software Package
Operating Manual

GPP Function Software
Package Operating Manual

Chapter 4

Chapter 4