Mitsubishi Electric AJ65BT-D75P2-S3 User Manual page 55

2 SYSTEM CONFIGURATION
Functions characteristic to machine
zero point return
Functions that compensate control
Functions that limit control
Auxiliary functions
Functions that change control details
Absolute position restoration function
Other functions
Common function LED display function
1
Limited to the case where " Cd. 21 Speed/position changeover control
*
movement amount change register" and " Cd. 36 Speed/position changeover
control (ABS mode) function valid flag" is not set.
2
* Limited to the case where " Cd. 31 Positioning starting point number" is used
as "0 (default value)".
3
* Limited to the case where " Cd. 23 Manual pulse generator 1 pulse input
magnification" is used as "1 time (default value)".
Function
(b) Functions that require transient transmission (Use them after
examination of the following restrictions)
The following gives the functions that can be achieved by use of transient
transmission.
The following functions that can be achieved by use of transient
transmission are more complicated in sequence program and further take
longer processing time than the basic functions that can be achieved by
use of cyclic transmission since they require access to the D75P2 buffer
memory.
After confirming the transmission delay time (refer to Section 3.6), it is
recommended to use them in applications that do not need fast processing.
When fast processing is required, it is recommended to perform control with
"(a) Functions that can be achieved by cyclic transmission only".
Zero point return retry function
Zero point shift function
Backlash compensation function
Electronic gear function
Near pass mode function
Speed limit function
Software stroke limit function
Hardware stroke limit function
Speed change function
Override function
M code output function
Command in-position function
Stepping motor mode function
Acceleration/deceleration processing function
Indirectly specification function
2 - 9
MELSEC-A
Reference
Section 12.2.1
Section 12.2.2
Section 12.3.1
Section 12.3.2
Section 12.3.3
Section 12.4.1
Section 12.4.3
Section 12.4.4
Section 12.5.1
Section 12.5.2
Section 12.6
Section 12.7.3
Section 12.7.5
Section 12.7.6
Section 12.7.7
Section 12.7.8
Section 13.4