Agilent Services; Contacting Agilent - Agilent Technologies VS Series Operation Manual

VS Series Helium Mass Spectrometer Leak Detectors

Agilent Services

Agilent offers:
Rebuilt spectrometers on an exchange basis.
❑
NIST-traceable calibrated leak testing and verification services.
❑
Preventive maintenance services.
❑
Overhaul services.
❑
System recertification.
❑
Support agreements.
❑
On-site support.
❑
Please see our catalog or contact us to learn about available services.

Contacting Agilent

In the United States, you can contact Agilent Customer Service at 1-800-882-7426. See the
back cover of this manual for a listing of our sales and service offices.
Visit our web site at:
http://www.chem.agilent.com/en‐US/products‐services/Instruments‐Systems/
Vacuum‐Technologies/Pages/default.aspx
For leak detector support agreements:
http://www.chem.agilent.com/en‐US/products‐services/Services/Vacuum‐Product‐Services/
Extended‐Care/Pages/default.aspx
xxi
To avoid injury, wait until the turbo pump is completely
WARNING
stopped before disconnecting it from the vacuum system.
To vent the turbo, use the system vent function described in
Section 3.1.8.1 "Turbo Vent" on page 3-20.
Check the oil level often. Do not allow oil-based mechanical
CAUTION
pumps to run when the oil level is below the LOW mark.
Damage to pumps can occur if operated with no oil, if the oil
level is too high or if the oil has become discolored.