Location Of Rear Cover Screws - Agilent Technologies VS Series Operation Manual

VS Series Helium Mass Spectrometer Leak Detectors
To install oil in the pump:
1. Unplug the power cord.
2. Use the hex wrench provided to remove the rear cover by removing the four screws
(Figure 1-5).
Figure 1-5 Location of Rear Cover Screws
3. Locate the oil fill point on the pump and install oil.
4. Reinstall the rear cover.
5. Reconnect the power cord.
The pump manuals may also be obtained from the Agilent website:
http://www.chem.agilent.com/en‐US/products‐services/Instruments‐Systems/Vacuum‐Technol
ogies/Pages/default.aspx
1-11