Detector Error Messages; Lamp Cover Open; Flf Board Not Found - Agilent Technologies 1260 Infinity User Manual

7
Error Information

Detector Error Messages

Detector Error Messages

These errors are detector specific.

Lamp Cover Open

The lamp cover in the optical compartment has been removed. The lamp
cannot be turned on while this message is on.
Probable cause
1

FLF Board not found

The FLF board could not be found by the main board (FLM). This message
comes together with some other message generated on the FLF board (e.g.
Leak, ...).
Probable cause
1
2
3
138
Lamp cover removed.
FLF board not connected to the FLM board.
Defective FLF board.
Defective FLM board.
Suggested actions
Please contact your Agilent service
representative.
Suggested actions
Please contact your Agilent service
representative.
Please contact your Agilent service
representative.
Please contact your Agilent service
representative.
Agilent 1260 FLD User Manual