Display Ptp Interface - HPE FlexFabric 5930 Series Network Management And Monitoring Command Reference

FGE1/0/1
FGE1/0/2
Table 14 Command output
Field
Interface
Clock ID
C
A
OSLV
SR
GM

display ptp interface

Use display ptp interface to display PTP running information for an interface.
Syntax
display ptp interface [ interface-type interface-number | brief ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
interface-type interface-number: Specifies an interface by its type and number. If you specify an
interface, this command displays detailed PTP running information for the specified interface. If you
do not specify an interface, this command displays PTP running information for all interfaces.
brief: Displays brief PTP running information for all interfaces. If you do not specify this keyword, this
command displays detailed PTP running information for the specified interface or all interfaces.
Usage guidelines
If PTP is enabled on an interface, detailed running information can be displayed without the brief
keyword in this command.
If PTP is operating on the interface, brief running information can be displayed with the brief keyword
in this command.
Examples
# Display brief PTP running information for all interfaces.
<Sysname> display ptp interface brief
Name
FGE1/0/1
FGE1/0/2
# Display detailed PTP running information for FortyGigE 1/0/1.
000FE2-FFFE-FF0000
000FE2-FFFE-FF0001
Description
Name of a PTP interface.
Clock ID of the foreign master node.
Time class.
Time accuracy.
Offset of the grandmaster clock.
Hops from the grandmaster to the local clock node.
Whether the node represents the grandmaster clock:
•
Yes.
•
No.
State Delay mechanism
Slave E2E
Passive E2E
0 128 248 254
0 128 248 254
Clock step
Two
Two
53
65535 0 Yes
65535 1 No
Asymmetry correction
0
0