Destination Ipv6; Destination Port - HPE FlexFabric 5930 Series Network Management And Monitoring Command Reference

destination ipv6

Use destination ipv6 to configure the destination IPv6 address for the operation.
Use undo destination ipv6 to remove the destination IPv6 address.
Syntax
destination ipv6 ipv6-address
undo destination ipv6
Default
No destination IPv6 address is configured for the operation.
Views
DNS/ICMP/TCP/UDP template view
Predefined user roles
network-admin
Parameters
ipv6-address: Specifies the destination IPv6 address for the operation. IPv6 link-local addresses are
not supported.
Examples
# In ICMP template view, configure the destination IPv6 address as 1::1 for the operation.
<Sysname> system-view
[Sysname] nqa template icmp icmptplt
[Sysname-nqatplt-icmp-icmptplt] destination ipv6 1::1

destination port

Use destination port to configure the destination port number for the operation.
Use undo destination port to remove the destination port number.
Syntax
destination port port-number
undo destination port
Default
The destination port number is 33434 for the UDP tracert operation.
The destination port number is 53 for the DNS template.
No destination port number is configured for other types of operations or templates.
Views
TCP/voice operation view
UDP echo operation view
UDP jitter operation view
UDP tracert operation view
DNS/TCP/UDP template view
178