Display Ntp-Service Sessions - HPE FlexFabric 5930 Series Network Management And Monitoring Command Reference

Hide thumbs Also See for FlexFabric 5930 Series:
Table of Contents

Advertisement

Field
Filter order
Reference clock status
Total sessions

display ntp-service sessions

Use display ntp-service sessions to display information about all IPv4 NTP associations.
Syntax
display ntp-service sessions [ verbose ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
verbose: Displays detailed information about all IPv4 NTP associations. If you do not specify this
keyword, the command displays only brief information about the NTP associations.
Usage guidelines
When a device is operating in NTP broadcast or multicast server mode, the display ntp-service
sessions command does not display the IPv4 NTP association information corresponding to the
broadcast or multicast server, but the associations are counted in the total number of associations.
Examples
# Display brief information about all IPv4 NTP associations.
<Sysname> display ntp-service sessions
source
********************************************************************************
[12345]LOCAL(0)
[5]0.0.0.0
Notes: 1 source(master), 2 source(peer), 3 selected, 4 candidate, 5 configured.
Total sessions: 1
Table 6 Command output
Field
source
Description
Dispersion information.
Status of the local clock. The field is displayed only when you use
the ntp-service refclock-master command to set the local clock
as a reference clock.
When the reach field of the local clock is 255, the field is displayed
as working normally. Otherwise, the field is displayed as
working abnormally.
Total number of associations.
reference
stra reach poll
LOCL
INIT
16
Description
When the reference clock is the local clock, the field displays LOCAL
(number), which indicates that the IP address of the local clock is
127.127.1.number, where number represents the NTP process
number in the range of 0 to 3.
When the reference clock is the clock of another device, the field
displays the IP address of the NTP server. If this field displays 0.0.0.0,
the IP address of the NTP server has not been resolved successfully.
15
now offset
0
1
64
- 0.0000 0.0000 7937.9
0
64
- 0.0000 0.0000 0.0000
delay disper

Advertisement

Table of Contents
loading

Table of Contents