HPE FlexFabric 5930 Series Network Management And Monitoring Command Reference page 254

tos tos: Specifies the ToS value in the IP header for reply packets. The value range for the tos
argument is 0 to 255, and the default value is 0.
Usage guidelines
Use this command on the NQA server only for the UDP jitter, UDP echo, and voice operations.
When you configure the IP address and port number for a UDP listening service on the NQA server,
follow these restrictions and guidelines:
•
The IP address and port number must be unique on the NQA server and match the
configuration on the NQA client.
•
The IP address must be the address of an interface on the NQA server.
•
To ensure successful NQA operations and avoid affecting existing services, do not configure
the UDP listening service on well-known ports from 1 to 1023.
Examples
# Configure a UDP listening service to enable the NQA server to listen and respond on the IP
address 169.254.10.2 and port 9000.
<Sysname> system-view
[Sysname] nqa server udp-echo 169.254.10.2 9000
Related commands
•
display nqa server
•
nqa server enable
245