Ntp-Service Ipv6 Multicast-Client - HPE FlexFabric 5930 Series Network Management And Monitoring Command Reference

Hide thumbs Also See for FlexFabric 5930 Series:
Table of Contents

Advertisement

Predefined user roles
network-admin
Usage guidelines
To disable an interface on the device from synchronizing the peer devices in the corresponding
subnet or disable the device from being synchronized by the peer devices in the subnet
corresponding to an interface, execute the undo ntp-service ipv6 inbound enable command on
the interface.
Examples
# Disable VLAN-interface 1 from processing IPv6 NTP messages.
<Sysname> system-view
[Sysname] interface vlan-interface 1
[Sysname-Vlan-interface1] undo ntp-service ipv6 inbound enable

ntp-service ipv6 multicast-client

Use ntp-service ipv6 multicast-client to configure the device to operate in IPv6 NTP multicast
client mode and use the current interface to receive IPv6 NTP multicast packets.
Use undo ntp-service ipv6 multicast-client to remove the configuration.
Syntax
ntp-service ipv6 multicast-client ipv6-multicast-address
undo ntp-service ipv6 multicast-client ipv6-multicast-address
Default
The device does not operate in any NTP association mode.
View
Interface view
Predefined user roles
network-admin
Parameters
ipv6-multicast-address: Specifies an IPv6 multicast IP address. An IPv6 broadcast client and an IPv6
broadcast server must be configured with the same multicast address.
Usage guidelines
After you configure the command, the device listens to IPv6 NTP messages using the specified
multicast address as the destination address. It is synchronized based on the received IPv6 NTP
messages.
If you have configured the device to operate in IPv6 multicast client mode on an interface by using
the command, do not add the interface to any aggregate group. To add the interface to an aggregate
group, remove the configuration of the command.
Examples
# Configure the device to operate in IPv6 multicast client mode and receive IPv6 NTP multicast
messages with the destination FF21::1 on VLAN-interface 1.
<Sysname> system-view
[Sysname] interface vlan-interface 1
[Sysname-Vlan-interface1] ntp-service ipv6 multicast-client ff21::1
30

Advertisement

Table of Contents
loading

Table of Contents