Display Rtm Policy - HPE FlexFabric 5930 Series Network Management And Monitoring Command Reference

Views
Any view
Predefined user roles
network-admin
Parameters
var-name: Specifies a user-defined EAA environment variable by its name. If you do not specify a
variable, this command displays all user-defined EAA environment variables.
Examples
# Display all user-defined EAA environment variables.
<Sysname> display rtm environment
Name
save_cmd
show_run_cmd

display rtm policy

Use display rtm policy to display monitor policies.
Syntax
display rtm policy { active | registered } [ policy-name ]
Views
Any view
Predefined user roles
network-admin
Parameters
active: Displays policies that are running.
registered: Displays policies that have been created.
policy-name: Specifies a policy by its name. If you do not specify a policy, this command displays all
monitor policies that are running or have been created.
Examples
# Display all running monitor policies.
<Sysname> display rtm policy active
JID Type
507 TCL
# Display all monitor policies that have been created.
<Sysname> display rtm policy registered
Total number: 3
Type Event
CLI
CLI
CLI CLI
Value
save main force
display current-configuration
Event TimeActive
INTERFACE Apr 21 17:45:38 2012
TimeRegistered
Jan 01 06:05:09 2013
Jan 01 06:30:29 2013
Jan 01 08:24:07 2013
PolicyName
test1
PolicyName
acli
syslog
test
311