Tracert Ipv6 - HPE FlexFabric 5930 Series Network Management And Monitoring Command Reference

Field
425 ms 30 ms
MPLS Label=100048 Exp=0
TTL=1 S=1

tracert ipv6

Use tracert ipv6 to display the path that the IPv6 packets traverse from source to destination.
Syntax
tracert ipv6 [ -f first-hop | -m max-hops | -p port | -q packet-number | -t traffic-class | -vpn-instance
vpn-instance-name | -w timeout ] * host
Views
Any view
Predefined user roles
network-admin
Parameters
-f first-hop: Specifies the TTL value of the first packet. The value range is 1 to 255, and the default is
1. It must be smaller than or equal to the value of the max-hops argument.
-m max-hops: Specifies the maximum number of hops allowed for a packet. The value range is 1 to
255, and the default is 30. It must be greater than or equal to the value of the first-hop argument.
-p port: Specifies an invalid UDP port of the destination. The value range is 1 to 65535, and the
default is 33434.
-q packet-number: Specifies the number of probe packets sent each time. The value range is 1 to
65535, and the default is 3.
-t traffic-class: Specifies the traffic class value in an IPv6 probe packet. The value range is 0 to 255,
and the default is 0.
-vpn-instance vpn-instance-name: Specifies the MPLS L3VPN instance to which the destination
belongs, where the vpn-instance-name argument is a case-sensitive string of 1 to 31 characters. If
the destination is on the public network, do not specify this option.
-w timeout: Specifies the timeout time (in milliseconds) of the reply packet of a probe packet. The
value range is 1 to 65535, and the default is 5000.
host: Specifies the IPv6 address or host name of the destination. The host name is a
case-insensitive string of 1 to 253 characters, which can contain letters, digits, and special
characters such as hyphen (-), underscore (_), and dot (.).
Description
name and IP address of the first hop, and the round-trip time of three probe
packets. If the domain name of the first hop is not configured, the IP
address is displayed.
The number of packets that can be sent in each probe can be set through
the -q keyword.
ICMP timeout packets on an MPLS network, carrying MPLS label
information:
•
Label—Label value that is used to identify a forwarding equivalence
class (FEC).
•
Exp—Reserved, usually used for class of service (CoS).
•
TTL—TTL value.
•
S—MPLS supports multiple levels of labels. Value 1 indicates that the
label is at the bottom of the label stack, and value 0 indicates that the
label is in another label stack.
9