rtm environment
Use rtm environment to configure an EAA environment variable.
Use undo rtm environment to delete a user-defined EAA environment variable.
Syntax
rtm environment var-name var-value
undo rtm environment var-name
Default
The system provides the variables in
system-defined variables.
Table 78 System-defined EAA environment variables by event type
Variable name
Any event:
_event_id
_event_type
_event_type_string
_event_time
_event_severity
CLI:
_cmd
Syslog:
_syslog_pattern
Hotplug:
_slot
_subslot
Interface:
_ifname
SNMP:
_oid
_oid_value
SNMP-Notification:
_oid
Process:
_process_name
Views
System view
Predefined user roles
network-admin
Table
78. You cannot create, delete, or modify these
Description
Event ID.
Event type.
Event type description.
Time when the event occurs.
Severity level of an event.
Commands that are matched.
Log message content.
ID of the IRF member device where a hot swap event occurs.
ID of the subslot where a hot swap event occurs.
Interface name.
OID of the MIB variable where an SNMP operation is performed.
Value of the MIB variable.
OID that is included in the SNMP notification.
Process name.
321