Info-Center Security-Logfile Alarm-Threshold; Info-Center Security-Logfile Enable - HPE FlexFabric 5930 Series Network Management And Monitoring Command Reference

[Sysname-LoopBack0] ip address 2.2.2.2 32
[Sysname-LoopBack0] quit
[Sysname] info-center loghost source loopback 0

info-center security-logfile alarm-threshold

Use info-center security-logfile alarm-threshold to set the alarm threshold for security log file
usage.
Use undo info-center security-logfile alarm-threshold to restore the default.
Syntax
info-center security-logfile alarm-threshold usage
undo info-center security-logfile alarm-threshold
Default
The alarm threshold for security log file usage is 80. When the usage of the security log file reaches
80%, the system outputs a message to inform the administrator.
Views
System view
Predefined user roles
network-admin
Parameters
usage: Specifies an alarm threshold. The value must be an integer in the range of 1 to 100.
Usage guidelines
When the security log file is full, the system deletes the oldest logs and then writes new logs to the
security log file. This feature helps avoid security log loss by setting an alarm threshold for the
security log file usage. When the threshold is reached, the system outputs log information to inform
the administrator. The administrator can log in to the device as the security log administrator, and
back up the security log file.
Examples
# Set the alarm threshold for security log file usage to 90.
<Sysname> system-view
[Sysname] info-center security-logfile alarm-threshold 90
Related commands
info-center security-logfile size-quota

info-center security-logfile enable

Use info-center security-logfile enable to enable saving of security logs to the security log file.
Use undo info-center security-logfile enable to restore the default.
Syntax
info-center security-logfile enable
undo info-center security-logfile enable
Default
The saving of security logs to the security log file is disabled.
96