Netconf Ssh Server Enable - HPE FlexFabric 5930 Series Network Management And Monitoring Command Reference

Syntax
netconf soap https enable
undo netconf soap https enable
Default
NETCONF over SOAP over HTTPS is disabled.
Views
System view
Predefined user roles
network-admin
Usage guidelines
This command enables the device to resolve NETCONF messages that are encapsulated with
SOAP in HTTPS packets.
Examples
# Enable NETCONF over SOAP over HTTPS.
<Sysname> system-view
[Sysname] netconf soap https enable

netconf ssh server enable

Use netconf ssh server enable to enable NETCONF over SSH.
Use undo netconf ssh server enable to disable NETCONF over SSH.
Syntax
netconf ssh server enable
undo netconf ssh server enable
Default
NETCONF over SSH is disabled.
Views
System view
Predefined user roles
network-admin
Usage guidelines
This feature allows you to use an SSH client to invoke NETCONF as an SSH subsystem. Then, you
can directly issue XML messages to perform NETCONF operations without using the xml command.
Before you execute this command, configure the authentication mode for users as scheme on the
device. Then, the NETCONF-over-SSH-enabled user terminals can access the device through
NETCONF over SSH.
Only capability set urn:ietf:params:netconf:base:1.0 is available. It is supported by both the device
and user terminals.
Examples
# Enable NETCONF over SSH.
<Sysname> system
[Sysname] netconf ssh server enable
345