Ntp-Service Max-Dynamic-Sessions - HPE FlexFabric 5930 Series Network Management And Monitoring Command Reference

If the specified IPv6 address of the NTP server is a link local address, you must specify the source
interface for NTP messages and cannot specify a VPN for the NTP server.
Examples
# Specify the IPv6 NTP server 2001::1 for the device.
<Sysname> system-view
[Sysname] ntp-service ipv6 unicast-server 2001::1
Related commands
•
ntp-service authentication enable
•
ntp-service authentication-keyid
•
ntp-service reliable authentication-keyid

ntp-service max-dynamic-sessions

Use ntp-service max-dynamic-sessions to set the maximum number of dynamic NTP sessions
allowed to be established locally.
Use undo ntp-service max-dynamic-sessions to restore the default.
Syntax
ntp-service max-dynamic-sessions number
undo ntp-service max-dynamic-sessions
Default
The maximum number of dynamic NTP sessions is 100.
View
System view
Predefined user roles
network-admin
Parameters
number: Sets the maximum number of dynamic NTP associations allowed to be established, in the
range of 0 to 100.
Usage guidelines
A single device can have a maximum of 128 concurrent associations, including static associations
and dynamic associations. A static association refers to an association that a user has manually
created by using an NTP command, while a dynamic association is a temporary association created
by the system during operation.
Examples
# Set the maximum number of dynamic NTP associations allowed to be established to 50.
<Sysname> system-view
[Sysname] ntp-service max-dynamic-sessions 50
Related commands
display ntp-service sessions
35