User role
network-operator
NETCONF messages must comply with the XML format requirements and the semantic and
syntactic requirements in the NETCONF XML API reference for the switch. To ensure successful
configuration, use third-party software to generate NETCONF messages.
To quit XML view, use a NETCONF message instead of the quit command.
If you have configured a shortcut key by using the escape-key command in user line/user line class
view, the NETCONF message should not contain the shortcut key string. If the NETCONF message
contains the shortcut key string, relevant configurations in XML view might be affected. For example,
in user line view, you configured "a" as the shortcut key by using the escape-key a command. When
a NETCONF message contains the character "a," only the contents after the last "a" in the message
can be processed.
Examples
# Enter XML view.
<Sysname> xml
<?xml version="1.0" encoding="UTF-8"?><hello
xmlns="urn:ietf:params:xml:ns:netconf:base:1.0"><capabilities><capability>urn:ietf:pa
rams:netconf:base:1.1</capability><capability>urn:ietf:params:netconf:writable-runnin
g</capability><capability>urn:ietf:params:netconf:capability:notification:1.0</capabi
lity><capability>urn:ietf:params:netconf:capability:validate:1.1</capability><capabil
ity>urn:ietf:params:netconf:capability:interleave:1.0</capability><capability>urn:h3c
:params:netconf:capability:h3c-netconf-ext:1.0</capability></capabilities><session-id
>1</session-id></hello>]]>]]>
# Quit XML view.
<rpc message-id="101" xmlns="urn:ietf:params:xml:ns:netconf:base:1.0">
<close-session>
</close-session>
</rpc>]]>]]>
<Sysname>
NETCONF operations
•
Get
•
Get-bulk
•
Get-bulk-config
•
Get-config
•
Get-sessions
•
Close-session
347